Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Optional Accessories
Push handle and how to fit Push Handle
1. Remove footboard, both end caps and the
'snap latch' lug
2. Remove the small plastic strips on the inside
of both pedestal legs.
3. Position the push handle using the bottom
two screw holes and secure with 3 x 15mm
button head screws and washers
4. Secure 1x25mm screw through the 'snap
latch' lug back into its original position.
Replace end caps and footboard.'
6.1 Extension Kit- extending the bed
The standard length of the FloorLine-i Plus and
FloorLine-i bed's mattress platform is 2000mm
(783/4 ") measured internally between the head
and footboards.
An optional Bed Extension Kit may be
purchased separately, that will lengthen the
bed, by 175mm (7 ") to 2175mm (851/2 ") to
accommodate taller people.
www.humancaregroup.com
Requirements:
1. Two qualified assembly persons
2. A mains power outlet/power-point
Tools required:
1. Work bench
2. 3mm, 4mm & 5mm Allen Keys
3. 10mm & 13mm Spanner/Socket Wrench
4. Needlenose Pliers
5. Small flat screwdriver
Extension kit contents CONTENTS
• 2 x Extension Brackets
• An Extension Mattress Platform Panel (F8)
• 4 x Extension Panel Platform Bolts/Nuts
• Full instructions to fit the extension.
Bed extension stages
1) Preparation
2) Disconnect Cables
3) Remove Mattress Platform from Bed Base
4) Install Mattress Platform Extension Brackets
5) Add Extension Panel to Mattress Platform
6) Extend Bed Base
7) Re-Attach Extended Mattress Platform
8) Re-Connecting Cables
9) Conclude Assembly & Test all Functions.
Preparation
1. Confirm all the kit contents.
2. Remove all bedding and accessories.
3. Test bed functions & complete a visual
inspection. Report any faults/damage.
4. Clean the bed thoroughly
5. Ensure sufficient protected floor space for
installation.
6. Remove the Head/Footboards, and safely set
aside.
7. Connect mains power cable to power outlet.
ENG
13
Advertenties
Inhoudsopgave
