Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Intended Use
These beds are designed for use in hospital care
and long -term care facilities, for the purpose
of providing comfort and quality care for any
person being ill, frail, disabled, or in need of
special care.
These beds may only be operated by persons
who have received instruction in its safe
operation. These beds may only be operated
under the conditions of duty described in this
manual.
6. Optional Accessories
It is important that only Human Care
accessories are fitted to Human Care
beds, as any incompatible accessories can
create hazards.
Mattresses
The medical bed is designed for use with specific
mattress types and dimensions measuring
1980mm (78") long by 900mm (35") wide and
125mm (5") deep. It is imperative to use this
size mattress to reduce the risk of entrapment
and falls.
Incompatible mattresses can
o
create hazards.
Self Help (SH) Pole and how to fit a Self Help Pole
The Self Help Pole is intended to assist a patient
moving within the confines of the bed. It is not
to be used for any other purpose. The Self Help
Pole has a safe working load of 75kg (165lb).
The fittings for the Self Help Pole are fitted into
the head end leg extrusion above the green
directional castor.
1. The fittings are designed to slide up into the
extrusion slot.
2. Pic 1 Identify top fitting as this is placed first.
3. Install using bolt and nut assembly provided.
Fit top tab of bracket into the aluminium
www.humancaregroup.com
ANY OTHER USE SHALL BE REGARDED AS
NONCOMPLIANT WITH SAFE, LEGAL AND
CORRECT USAGE AND MAY INVALIDATE
WARRANTY.
The head and foot end pedestal covers of the
beds are ABS plastic. The bed also comprises
electrical componentry and cables. All the
surfaces are non-harmful, upon coming into
contact with the skin.
extrusion slot. Push the bracket up inside
the slot until there is no further movement.
Slide the nut assembly into the extrusion slot
from the bottom of the extrusion; push nut
assembly to meet the top bracket and firmly
tighten with bolt provided.
4. Pic 2. The lower bracket can then be fitted
into the slot from the bottom.
5. Slide Self Help Pole Nut plate Bracket up into
accessory slot in pedestal extrusion.
6. Pic 3 Tighten the hex head bolts. Only Human
Care self help poles will fit the beds Pic 4
shows final position for lower bracket.
ENG
ENG
Picture 1
Picture 2
11
Advertenties
Inhoudsopgave
