Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
E N
AC T I VAT I O N
Spray gun
• Do not spray: release the lever in the handle.
• Spraying: push the lever in the handle.
• Spray security: release the blocking pawl in the handle.
The machine is standard equipped with a single lance. When changing the
spraying tool, always turn off the cleaner first!
7 P R OT E C T I V E C A P
The protective cap can be opened/closed easily by means of the locking
button. The cover cap must be closed when starting the spray activities (when
engine is working), otherwise a message will appear on the display (see
also: "12 Failures" on page 34 ).
Pay attention: make sure the protective cap can close properly in
the closing mechanism before you drive on the road with the JMB.
8 WO R K I N G L I G H T / F L A S H I N G B E AC O N ( O P T I O N )
The working light is mounted on the side of the operating part of the trailer, the
flashing beacon is mounted on top of the protective cap.
Both lights can be turned on / off via the control panel display.
Note: do not turn on the working light / flashing
light while driving on public roads!
DISPLAY / FAILURES
In the middle on top of the display you can read the actual operating hours of
the machine and you can check if the antifreeze filling function is active. An
alarm notification icon is also visible when an alarm occurs (top right). Centrally
you can read the working pressure and the output temperature. Left on top
the engine speed setting will be displayed (100% is similar to the max. adjusted
pressure, example: 250 Bar. When the engine speed setting is 50%, the working
pressure will visualize 125 bar. At a high temperature setting, the pressure
indication will be noticeably lower).
Remark: if the high temperature valve is activated, the cleaner will go
automatically to the 'high temperature function' ! Right on top the setting
temperature will be displayed. Setting: 0°C= burner off & 1°C or more= stand-
by temperature. Centrally (just below the manometers), the cooling water
temperature indication is displayed.
It can be that the actual temperature has a higher value than
the setting temperature, the burner will not work until the
actual temperature is lower than the setting temperature.
1
Temperature settings
Determine experimentally which engine speed (spray pressure) and at which
temperature the object best can be cleaned without damaging it.
Protein-containing material, rubber or synthetic material: knob not higher than
50°C. For the other settings the most diverge materials and/or machines will be
cleaned. Therefore, there are no fixed settings to be displayed.
DiBO 30
Advertenties
Hoofdstukken
Inhoudsopgave
