food deposit removed. See chapter:
"Maintenance".
If needed, close the cooking compartment
with the specific lids or else proceed with
the following operations in order: Burnt oil
drain / Routine maintenance.
BURNT OIL DRAIN - see SECT. IMA-
GES - REF o)
While draining burnt oils, the risk
of being burnt remains. This risk
can occur by unintentional con-
tact with oil processed at high tempera-
tures.
Before operating, wait for the oil
inside the cooking compartment
to cool off.
Free the cooking compartment
from containers used during co-
oking.
The burnt oil collection container
has a limited capacity. Keep an
eye on the container as it fills whi-
le oil is emptied from the cooking com-
partment.
TOP Version / Introducing the
extension supplied in the oil drain
pipe up to the stop ( Fig . 12)
TOP version / Place a container (
appropriate for material and capa-
city ) and proceed to I unload.
Do not fill the oil collection contai-
ner beyond 3/4 its capacity to
handle it safely.
Open the door of the appliance and
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
INSTRUCTIONS FOR USE
make sure the collection container is
underneath the drainage gate valve
(Fig. 7).
After having made sure that the container
is in its housing (empty), open the drai-
nage gate valve (Fig. 8) and let exhaust
oil empty from the cooking compartment
into the container.
Fill the container no more than 3/4 its ca-
pacity to handle it safety. Close the gate
valve (Fig. 9).
Remove the container from its seat and
empty it in compliance with waste dispo-
sal procedures in force in the country of
use (Fig.10). Then reposition the empty
container in its seat.
Repeat the aforementioned operations
until the cooking compartment is empty.
Close the door of the appliance.
Close the network locks upstream the
appliance (Gas - Water - Electric).
Check the cleanliness and hygiene of the
appliance and of the cooking containers.
See "Maintenance".
- 22 -
8.
EN