Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1
3. When Rapid heat up is completed, an
acoustic signal sounds and "FHU" goes
out.
At this time the appliance continues to
heat in the set oven function and oven
temperature.
CLOCK FUNCTIONS
Clock function
Time of day
Minute minder
Duration
End
Duration
and End
the same time, if the oven is to be
switched on and off automatically later.
In this case first set Duration
End
.
Setting the clock functions
1. Set an oven function and a temperature
(not necessary for the Minute Minder).
Refer to "Setting the oven function".
2. Push
again and again until the sym-
bol for the necessary clock function
flashes.
4. Put the food in the oven.
Residual Heat function
With Duration function, the oven automati-
cally switches off some minutes before the
time period is completed. The oven uses
2
the residual heat to complete the cooking
without energy consumption.
Important! Residual heat function is
applicable only if the Duration is more than
15 minutes.
Shows the time. To set, change or check the time.
To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
To set how long the oven has to be in operation.
To set the switch-off time for an oven function.
3. To set the time for Minute minder
can be used at
, then
4. Deactivate the appliance.
2
1
Cancelling the clock functions
1. Push
2. Push "
Application
Duration
or End
button.
The related clock function symbol
comes on.
When the time period is completed, the
clock function symbol flashes and an
acoustic signal sounds for 2 minutes.
Push any button to stop the signal.
With the functions Duration
the appliance stops automatically.
again and again until necessa-
ry function indicator and
" again and again until the
time is "00:00".
progress 27
,
, push
or
and End
flashes.
Advertenties
Hoofdstukken
Inhoudsopgave
