6. Let the appliance operate without the
food for approximately 10 minutes.
This is to burn off the residue in the appli-
ance. The accessories can become more
hot than usually. When you pre-heat the
DAILY USE
To use the appliance, push the control
knob. The control knob comes out.
Cooking zones
With the control knobs for cooking
zones you operate the hob that you in-
stalled with the oven. For more infor-
mation about the hob, refer to the hob
user manual.
Heat settings
Control knob
0
Off position
Heat settings
1-9
(1 = lowest heat setting; 9=
highest heat setting)
1. Turn the control knob to a necessary
heat setting.
2. To complete the cooking process, turn
the control knob to the "0" position.
The display
1
Button
PYROLYTIC CLEANING
/
Function
2
3
Function
ON/OFF
SELECTOR
RAPID HEAT UP
PLUS, MINUS
CLOCK
appliance for the first time, the appliance
can make an odour and smoke. This is the
usual effect. Make sure the airflow is suffi-
cient.
Use of the double zone (if applicable)
Warning! To set double zone on turn
the control knob with the double zone
to the right (do not turn it through the
stop position).
1. Turn the control knob to the right - to
position "9".
2. Turn the control knob slowly to symbol
until you can hear a click.
At this time the two cooking zones are
on.
3. To set necessary heat setting refer to
"Heat settings".
Warning! Refer to "Safety information"
chapter.
1
Cooking function
2
Temperature
3
Time
Description
To switch the appliance on or off.
To set the oven function.
To switch the rapid heat-up function on.
To start the Pyrolytic cleaning.
To adjust the values (temperature and time).
To set the clock function.
progress 25