Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
Cylindrical brush installation/removal (only for SC650 71C)
1.
Press the switch (66) to start the machine.
2.
Lift the cylindrical brush deck by pressing the switch (61).
3.
Press and hold the switch (66) for nearly a second to turn off the machine.
4.
Remove the handwheels (A, Fig. 4) and the lids (B) by pushing them downwards and pressing on the handwheels.
5.
Install the cylindrical brushes (C).
The cylindrical brushes can be installed on either side.
6.
Install the lids (B) and fasten them with the handwheels (A).
7.
To remove the cylindrical brushes, perform steps 1 to 6 in the reverse order.
Available cylindrical brushes and their relevant application guides (suggestions only)
Models
General cleaning:
Concrete
Terrazzo floor
Ceramic tiles/quarry stones
Marble
Vinyl tiles
Rubber tiles
18
INSTRUCTIONS FOR USE
MAGNA GRIT 46
DYNA GRIT 80
55943387
Figure 4
MIDLITE GRIT
180
SC650 66D - SC650 71D - SC650 85D - SC650 71C
PROLENE
PROLITE
UNION MIX
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
