Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
SUPERVISOR SETTING
The supervisor allows to check some additional information on
some machine operating parameters and to adjust some settings
according to specific requirements.
Main Screen (D, Fig. 7)
1.
Access supervisor password page.
•
Press and hold the push-button (A) and (B)
simultaneously.
•
Press and release the switch (C).
•
Release the push-button (A) and (B) after the logo
disappears on the screen.
2.
Enter the supervisor password 4444.
3.
Press the push-button (B) to change the machine settings
(see Machine Settings Screen section).
Press push-button (A) to move the arrow to "ALARM LOG",
4.
and press the push-button (B) to check for any stored
machine alarms (see Alarms Log Screen section).
Press push-button (A) to move the arrow to "HOUR
5.
METERS", and press the push-button (B) to check the
machine's hours of operation (see Operating Time Counter
Screen section).
Press push-button (A) to move the arrow to "SET
6.
PASSWORD", and press the push-button (B) to enter the
user password management menu (see the User Key
Management Screen paragraph).
Machine Settings Screen (E, Fig. 7)
This function allows you to customize some parameters described
in the following table of modifiable parameters.
Press push-button (A) to move the arrow to "+" and
1.
press push-button (B) to increase the value of the current
parameter.
Press push-button (A) to move the arrow to "-" and press
push-button (B) to decrease the value of the current
parameter.
Press push-button (A) to move the arrow to "SAVE&NEXT"
2.
and press push-button (B) to save and move to the next
parameter.
Press push-button (A) to move the arrow to "EXIT" and press
3.
push-button (B) to return to the main screen.
26
INSTRUCTIONS FOR USE
55943387
SC650 66D - SC650 71D - SC650 85D - SC650 71C
Figure 7
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
