Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
FUSE CHECK/REPLACEMENT
1.
Disconnect the battery connector (12).
2.
Move aside the recovery water drain hose (16).
3.
Remove the battery charger cable (H, Fig. 15) from the cable holder (F).
4.
Remove the screws (A) and carefully move aside the panel (B) by disengaging the grommet (G) from its housing on the panel (B).
5.
Check/replace the following fuses:
C) Brush deck fuse F1: (50 A)
D) Vacuum system fuse F2: (30 A)
E) Drive system fuse F3: (60 A)
6.
Perform steps 1 to 4 in the reverse order.
34
INSTRUCTIONS FOR USE
55943387
Figure 15
SC650 66D - SC650 71D - SC650 85D - SC650 71C
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
