Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Lift the compression spring
groove for the compression spring
carbon brush
.
[
]
4. Remove the contact plug
contact shoe
.
[
]
5. Pull out the carbon brush from the guide.
6. Insert a new carbon brush into the guide.
7. Place the connector
groove for the compression spring. Lead the
connector through the side opening of the
guide.
8. Slide the contact plug on the contact shoe.
9. Replace the compression spring on the
groove for the compression spring of the
carbon brush.
10. Reattach the maintenance cover using the
screw.
11. Repeat steps 1 to 10 on the other side
of the product. The carbon brushes must
always be replaced in pairs.
˜ Storage
Store the product in a dry place well out of
o
reach of children.
Grinding discs must be dry and stored
o
upright and should never be stacked.
22 GB/IE/NI
out of the
[
]
of the
[
]
from the
[
]
in an arc past the
[
]
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the
packaging materials for waste
separation, which are marked with
abbreviations (a) and numbers
(b) with following meaning: 1–7:
plastics/20–22: paper and
fibreboard/80–98: composite
materials.
Product:
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment,
please dispose of the product
properly when it has reached the
end of its useful life and not in the
household waste. Information on
collection points and their opening
hours can be obtained from your
local authority.
Advertenties
Hoofdstukken
Inhoudsopgave
