Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Assembly
m
CAUTION! Risk of injury!
Ensure that you have sufficient space
u
in which to work, and that you do not
endanger other people.
All hoods and protective devices
u
must be assembled properly before
commissioning.
Disconnect the mains plug before
u
changing the setting on the product.
˜ Mounting the handle (fig. A)
m
WARNING!
The product must only be operated with
u
the handle
mounted.
[
1 ]
Depending on the method of working,
o
tighten the handle on to the handle thread
on the left
, right (fig. A) or top
[
7 ]
product.
˜ Assemble/set protective
cover/demounting (fig. D)
NOTE
If the protective cover
u
the position illustrated in fig. D j, push
the whole protective cover against the
product and turn it at the same time.
Adjust the protective cover such that any
o
sparks or detached parts cannot hit either
the user or any bystanders.
The protective cover must also be
o
positioned such that the sparks cannot
ignite combustible parts, including those in
the surroundings.
of the
2 ]
[
is engaged in
9 ]
[
Demounting the grinding disc
1. Press the spindle lock button
2. Turn the mounting spindle
spindle lock fixed the mounting spindle.
Keep and continue to hold down the
spindle lock button.
3. Release the clamping nut
the chuck key
[
]
the spindle lock button.
4. Take off the clamping nut, the mounting
flange
(fig. B) and cutting disc from the
[
]
mounting spindle.
Attaching the protective cover
5. Put the protective cover
such that the open side is facing back
towards the product.
The teeth on the protective cover and on
the product must mesh together (see detail
illustration j).
6. Push the protective cover towards the
product to turn it (see detail illustration k).
7. Fasten the wire ring
protective cover by pressing it into the flute
of the product's teeth.
8. Turn the protective cover into the working
position. The closed side of the protective
cover must always face the operator.
9. Readjust the position of the protective
cover if you find during use that it does not
provide optimum protection.
Removing the protective cover
10. Take off the protective cover
removing the wire ring
an object such as a small screwdriver (see
detail illustration l).
For simple removal, turn the protective cover
only after taking off the wire ring to the
position shown in detail illustration j.
(fig. A).
[
]
until the
[
]
(fig. B) with
[
]
(fig. A). You can release
onto the product
9 ]
[
to secure the
[
]
by
9 ]
[
with the help of
[
]
GB/IE/NI
17
Advertenties
Hoofdstukken
Inhoudsopgave
