Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Practical tips
m
WARNING!
When selecting the tool, ensure that its
u
specified permissible rotation speed is
at least as high as the maximum rotation
speed specified on the product.
When selecting the disc, pay attention to
u
the maximum permissible diameter and
the maximum permissible thickness.
Pay attention to the thread size M14
u
when selecting the brush.
˜ Scrubbing wheels (fig. J)
WARNING!
m
Never use a cutting wheel for scrubbing!
u
The product must only be operated with
u
the protective hood mounted when the
rough grinding wheel is used.
Fit the protective cover
o
wheels, see "Fitting/adjusting/removing the
protective cover".
Exert only moderate pressure on the
o
workpiece. Move the product evenly back
and forth.
A working angle of 30° to 40° achieves
o
the best results for scrub grinding.
˜ Grinding with a wire brush
(fig. H)
m
WARNING!
Ensure that you observe the permissible
u
speed when selecting the wire brush.
The permissible rotation speed of the
wire brush must be at least as high as the
highest rotation speed indicated on the
product.
16 GB/IE/NI
for the scrubbing
9 ]
[
m
WARNING!
Wear protective goggles: wires may
become released!
Suitable for rough rust removal, cleaning
o
weld seams and removing paint.
Press the wire brush with medium force onto
o
the workpiece to be processed. Do not
exert excessive strain on the wire brush by
pressing down too hard.
˜ Cutting disc (fig. I)
m
WARNING!
Never use a scrubbing wheel for cutting!
u
The product must only be operated with
u
the protective hood mounted when the
cutting disc is used.
Fit the protective cover
o
attachment
for the cutting discs, see
[
]
"Fitting/adjusting/removing the protective
cover" and "Fitting the attachment to/
removing the attachment from the protective
cover".
Only certified, fibre-reinforced cutting discs
o
may be used.
In general, work with small scrubs. Exert
o
only moderate pressure on the workpiece.
Always work in the counter-direction. This
o
ensures that the product is not pushed out
of the cut through lack of control.
˜ Chuck key storage
The chuck key
[
]
o
handle
(fig. A).
[
1 ]
and the
[
9 ]
can be stowed in the
Advertenties
Hoofdstukken
Inhoudsopgave
