Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Figure B:
Mounting flange
[
]
Clamping nut
[
]
Mounting spindle
[
]
Figure C:
Compression spring
[
]
Carbon brush
[
]
Groove for compression spring
[
]
Connector
[
]
Contact shoe
[
]
Contact plug
[
]
Figure D:
Wire ring, protective cover fixing
[
]
Figure E:
Notch
[
]
˜ Technical data
Angle grinder
Rated input voltage:
Power input:
Idling speed (n):
Dimensions of the
cutting/roughing discs:
Thickness of the cutting/
roughing discs:
Grinding spindle thread:
Thread length of the
grinding spindle:
Protection class:
Ingress protection:
8
GB/IE/NI
PWS 125 G6
230 V∼, 50 Hz
1200 W
3000‒12000 min
–1
Ø 125×22.23 mm
max. 6 mm
M14
max. 12 mm
II/
IPX0
Cutting disc (included)
Idling speed n
:
0
Disc speed:
Outer diameter:
Bore hole:
Thickness:
* The grinding disc must keep a rotational
speed of 80 m/s.
Noise emission value
The measured values have been determined in
accordance with EN 60745. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
Uncertainty K
:
pA
Sound power level L
WA
Uncertainty K
:
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 60745:
Vibration a
:
h
Uncertainty K:
The values apply for the work mode surface
grinding. Other applications may have different
vibration emission values.
m
WARNING!
Wear ear protection!
max. 12200 min
max. 80 m/s*
Ø 125 mm
Ø 22.23 mm
1.2 mm
:
90.2 dB(A)
pA
3 dB
:
101.2 dB(A)
3 dB
6.95 m/s²
1.5 m/s²
–1
Advertenties
Hoofdstukken
Inhoudsopgave
