Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Use the power tool, accessories
7)
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Service
Have your power tool serviced
1)
by a qualified repair person
using only identical replacement
parts. This will ensure that the safety of
the power tool is maintained.
˜ Grinder safety warnings
m
WARNING!
Dust from materials such as lead paint,
u
some types of wood, and metal can be
harmful to your health.
Contact with or inhaling this type of
u
dust can present a danger to the user or
persons nearby.
WARNING!
m
Wear safety glasses and a dust
mask!
˜ Angle grinder warnings
Safety warnings common for grinding,
wire brushing and abrasive cutting-off
This power tool is intended for
1)
use as a grinder, wire brush and
abrasive cutting machine. Follow
all safety instructions, instructions
for use, illustrations and data
included with the device. Failure to
heed the following instructions can result
in electric shock, fire and/or serious injury.
Operations such as sanding and
2)
polishing are not recommended
to be performed with this power
tool. Operations for which the power
tool was not designed may create a
hazard and cause personal injury.
Do not use accessories which
3)
are not specifically designed
and recommended by the tool
manufacturer. Just because the
accessory can be attached to your power
tool, it does not assure safe operation.
The rated speed of the accessory
4)
must be at least equal to the
maximum speed marked on the
power tool. Accessories running faster
than their rated speed can break and fly
apart.
The outside diameter and the
5)
thickness of your accessory must
be within the capacity rating
of your power tool. Incorrectly
sized accessories cannot be adequately
guarded or controlled.
Threaded mounting of accessories
6)
must match the grinder spindle
thread. For accessories mounted
by flanges, the arbour size hole of
the accessory must fit the locating
diameter of the flange. Accessories
that do not match the mounting hardware
of the power tool will run out of balance,
vibrate excessively and may cause loss of
control.
Do not use a damaged accessory.
7)
Before each use inspect the
accessory such as abrasive
wheels for chips and cracks,
backing pad for cracks, tear or
excess wear, wire brush for loose
or cracked wires. If power tool or
accessory is dropped, inspect for
damage or install an undamaged
accessory. After inspecting and
installing an accessory, position
yourself and bystanders away
from the plane of the rotating
GB/IE/NI
11
Advertenties
Hoofdstukken
Inhoudsopgave
