Advertenties
6.3 Charging in Authentication mode (Autostart disabled
and connected)
If the Authentication Operating Mode is configured, the charging session should
be authorised via the
available only when
•
The LED bar of the appliance should be solid blue, meaning
Move
colours).
•
Insert the plug of the charging cable into the socket on the device, until it
is fully engaged.
•
Insert the plug of the Type 2 cable in the charge port of the electric vehicle.
•
If
eProWallbox Move
•
Charge the vehicle.
•
When charging is complete or the charging process needs to be stopped,
there are two possible ways to stop the charging session:
•
From the vehicle (e.g. unlocking the doors), then unplug the connector
from the vehicle and from
•
From
from the vehicle and from
•
The product returns to its initial state, ready for a new charging session.
CAUTION
At the end of the charging sessions, unplug the charging cable from
both the appliance and the vehicle and store it in a safe place.
eSolutions Charging
eProWallbox Move
is ready for charging (see Chapter 5.4
is connected to Wi-Fi, start remotely via app.
eSolutions Charging
Devices
Via Corradori 22 - Milano
00:02:30
:02:30
View more
CHARGING
DELAY
DELAY
S TOP
S
STOP
app. Authorisation through app is
is connected to Wi-Fi.
eProWallbox Move
eProWallbox Move
app, press STOP and remove the connector
eProWallbox
Move.
22
U ser M an ual
eProWallbox
LED bar
Advertenties
