Advertenties
6
INSTRUCTIONS FOR USE
6.1
Preliminary charging operations
WARNING
DO NOT remove the charging connector from the electric vehicle
during the entire charging process. Only remove the charging
connector from the vehicle when charging operations have ended
or have been halted following the appropriate procedure. In either
case, undue force must not be used.
Before starting a new charging session:
•
Ensure the appliance and its connectors are perfectly intact, dry, and free
of any impurities.
•
Do not insert fingers or objects into the socket.
•
Do not touch the appliance or any of its extensions with wet hands or bare
feet.
•
Make sure the appliance is not, and has not been, exposed to heat sources,
explosive or inflammable substances.
•
Ensure the electric vehicle is compatible with the appliance's technical
features.
•
Vehicle adapters must not be used to attach a connector to a vehicle socket.
•
Adapters between the vehicle socket and plugs should only be used if
specifically designated and approved by the vehicle manufacturer or
the manufacturer of the electric vehicle's power supply equipment, in
accordance with national requirements. Such adapters must, however,
comply with the requirements of the IEC 61851-1 standard and other
relevant standards governing both the plug and socket of the adapter.
The adapters must in any case be marked with specific indications for use
permitted by the manufacturer (e.g. IEC 62196).
19
U ser M an ual
Advertenties
