Advertenties
•
Keep the charging cable out of the reach of children.
•
Be careful not to step on the connector or cable.
WARNING
Do not use adapters or extensions not specified by Free2move
eSolutions S.p.A. as they may damage the product and create safety
hazards for the user.
CAUTION
eProWallbox Move must only be used according to the operating parameters
specified and at an ambient temperature between -25 ºC and 50 ºC.
6.2
First charge in default factory setting (Autostart and connected)
eProWallbox
default setting; the first step is to configure the Wi-Fi connection; see Chapter 5.2.1.
Follow the steps below to start a charging session:
•
The LED bar of the appliance should be solid blue, meaning
is ready for charging (see Chapter 5.4
•
Insert the plug of the charging cable into the socket on the device until it is
fully engaged.
•
Insert the plug of the Type 2 cable into the Charge Port of the electric vehicle.
Move is configured with Autostart Operating Mode enabled as the
eProWallbox Move
20
U ser M an ual
eProWallbox Move
LED bar colours).
Advertenties
