Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
♦
By turning the speed setting
wheel
in the respective
direction (marked with ON/
OFF), you switch on the grind-
ing machine and increase
or decrease the speed (see
figure 3) .
Fig . 3
Maintenance and
cleaning
WARNING! RISK OF
INJURY! Disconnect
the grinder from the
compressed-air
supply before
carrying out mainte-
nance work.
PDMS 6.3 A1
CAUTION!
►
Before maintenance, clean
off any hazardous substanc-
es that may (due to working
processes) have accumulat-
ed on the appliance . Avoid
all skin contact with these
substances . If the skin comes
into contact with hazardous
dusts, this can lead to severe
dermatitis .
If dust is produced or
swirled up during mainte-
nance, it can be inhaled .
NOTE
To ensure correct functioning
and long-term durability of the
sander, pay attention to the
following points:
■
Sufficient and continuously
intact oil lubrication is highly
important for optimum function-
ing .
■
Check the idle speed regularly
and after any maintenance is
performed:
use a rev counter and perform
the measurement without any
clamped tools .
GB │ IE │ NI
│
15
■
Advertenties
Hoofdstukken
Inhoudsopgave
