VOLTCRAFT B6 Quadro Gebruiksaanwijzing pagina 63
Verberg thumbnails
Zie ook voor B6 Quadro:
- Gebruiksaanwijzing (50 pagina's) ,
- Gebruiksaanwijzing (250 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
13. Saving Battery Data
You can view the entire menu structure in the correct order on the fold-out page. Here
the key functions for operating are also given.
The charger has altogether 10 memories in which you can save battery data/settings.
• In the main menu, select the function "SAVE DATA" with the button "BATT.TYPE/STOP":
• Press the button "START/ENTER"; the display shows the following, for example, and memory "01"
blinks:
• Select the desired memory with the buttons "INC" or "DEC" (1...10) and confirm your entry with the but-
ton "START/ENTER".
• Now the battery type, which you can change with the buttons "INC" or "DEC", blinks on the top right of
the display. Confirm the selection by pressing the "START/ENTER" button.
It is not possible to select between lithium batteries "LiPo", "LiIon" and "LiFe". The type
set in the user menu is always applied.
• The voltage starts to blink on the bottom left. Change this as usual using the buttons "INC" and "DEC"
and confirm the value using the "START/ENTER" button.
• Now the battery capacity blinks on the bottom right. Set this with the buttons "INC" or "DEC" (keep but-
ton depressed for longer for fast changing) and confirm this with the button "START/ENTER".
• Then the memory number blinks again.
• Keep the button "START/ENTER" depressed for longer (approx. 3 seconds) to access the next menu,
then let the button go again immediately. The following display appears (depending on the previously
selected battery type):
If the button "START/ENTER" is held down too long, "SAVE" appears in the display . and
the settings are saved. In this case, simply restart the setting in order to continue in the
menu.
62
All manuals and user guides at all-guides.com
Advertenties
