VOLTCRAFT B6 Quadro Gebruiksaanwijzing pagina 42
Verberg thumbnails
Zie ook voor B6 Quadro:
- Gebruiksaanwijzing (50 pagina's) ,
- Gebruiksaanwijzing (250 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
3. Intended Use
The Multicharger B6 Quadro is used to charge NiCD + NiMH type batteries (1-15 cells), LiPo/LiIon/LiFe
batteries (1-6 cells) and lead acid batteries (1-10 cells, 2V-20V). The charge current can be set at
between 0.1A and 5.0 A. The maximum charging power per output is 50W.
Accumulators can also be discharged; the discharge current is between 0.1 and 1.0A. The maximum dis-
charging power per output is 50W.
Optional temperature sensors can be connected to the charging channels 1 and 2 in order to monitor the
battery or alternatively a USB interface adapter can be connected to record data.
The charger has four independent charging/discharging channels. It may only be operated on a direct
current voltage of 11 to 15V/DC.
Each output has a two-line, illuminated display and four control keys.
A balancer is integrated into the charger for LiPo/LiIon/LiFe batteries, with balancer connector sockets
for the battery located on the side of the charger.
The product is intended for use in dry indoor spaces, it must not get damp or wet!
Any use other than that described above damages the product. Moreover, this is linked to dangers such
as short circuits, fire, electric shock, etc. No part of the product may be modified or rebuilt!
Read the operating instructions carefully and keep them for later reference.
Observe the safety instructions under all circumstances!
4. Scope of Delivery
Battery charger
2 terminals
Operating instructions
41
Advertenties
