Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8.2 Setting up the headlight
Headlights must be set up in such a way that oncoming road users are not blinded.
1.
Loosen the screw (1) by several turns in an anti-clockwise direction.
2.
Set up the headlights in such a way as described in "Setting up the headlight range".
3.
Affix the headlights by tightening the screw (1) in a clockwise direction.
8.2.1 Setting up the headlight range
The headlights must be set up in such a way that the light beam emitted is at half the height of the headlight at
a distance of 5 m/16.4 ft.
Switch the headlights on in order to check the direction of the light beam being emitted.
●
Loosen the screw (1) by several turns in an anti-clockwise direction.
●
Set up the headlights correctly as described above, by tipping them forwards and backwards.
●
Secure the headlights by tightening the screw (1) in a clockwise direction.
●
Note:
38
Ensure all lighting correspond to your national and regional requirements.
Advertenties
Hoofdstukken
Inhoudsopgave
