Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.3.5 Battery charge indicator
The battery charge indicator (i) displays the state of charge of the flatbed battery, not that of the on board
computer's internal battery. The state of charge of the battery can also be checked on the LED's of the battery
itself. Each bar of the battery symbol on the indicator (i) represents approximately 20 % of the capacity:
The battery pack is fully charged.
The battery pack should be recharged.
The LEDs of the battery charge indicator on the battery go out.
Once the capacity for assisting the drive has been used up, the assistance is gently switched off. The remaining
capacity is still available for the lighting and the onboard computer, the indicator flashes. The remaining capacity
of the e-bike battery is enough for about two hours of lighting. This does not account for other consumers
(e.g. automatic gearbox, charging external devices at the USB port). If the on-board computer is removed
from the holder (4), the last displayed state of charge of the battery is saved. If your Carqon is powered by two
batteries, the battery charge indicator displays the state of charge of both batteries.
5.3.6 Placing and removing the on-board computer
To place the on-board computer (3), slide it forwards into the holder (4). To remove the onboard computer
(3), press the locking mechanism (1) and slide the on-board computer forwards out of the holder (4).
The on-board computer can be secured in place to prevent it from being removed from the holder. To do so,
remove the holder (4) from the handlebars. Put the onboard computer in the holder. Screw the locking screw
(M3 thread, 8 mm long) from below into the thread provided in the holder. Mount the holder back onto the
handlebars. Note: The locking screw is not designed to prevent theft but just as a useful smart trick.
27
Advertenties
Hoofdstukken
Inhoudsopgave
