Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Screw components (where applicable)
Pedal crank (steel/aluminium)
Pedal
Thru axle
Seat (adjustment screw) M6/M8
Seat tube clamp M5/M6
Brake and gear lever on the handlebar
Handlebar stem with inner clamp (expander bolt shaft stem)
Optional luggage carrier (all screws and nuts)
1.6 Rotational direction of screws
Tighten the screws, quick-release axles and cotter pin nuts in a clockwise direction.
●
Loosen the screws, quick-release axles and cotter pin nuts in an anti-clockwise direction.
●
1.7 Seating position
An incorrect seating position can lead to muscular strains and joint pain. If you are not sure how to set up
the seating position, contact Carqon customer services or your Carqon dealer. An incorrect seating position
means that the accessibility of the control elements on the handlebar are restricted. If you are not sure how
to set up the seating position, contact your Carqon dealer. In order to control the flatbed safely, the seating
position must be adapted to your individual needs.
1.8 Wear and tear
Excessive wear, material fatigue or loose screw connections can cause malfunctions which will cause
accidents or falls. Therefore;
Check the flatbed regularly for wear.
●
Do not use the flatbed if cracks, deformities or colour changes (due to material fatigue or heavy rust)
●
are present.
Do not use the flatbed if excessive wear or loose screw connections are present.
●
Have the flatbed checked immediately by a Carqon dealer if excessive wear, loose screw connections,
●
cracks, deformities or colour changes (due to material fatigue or heavy rust) are present.
As with all mechanical components, flatbeds are exposed to wear and high levels of strain. Different materials
may react differently to wear or degradation caused by exposure to strain. All types of cracks, stretch marks
and colour change (due to material fatigue or heavy rust) show that the service life of the components has
expired. Worn components must be replaced.
Wear to components made from aluminium or composite materials can only be assessed by a Carqon dealer.
For frames, forks and running wheels made from composite materials, hard knocks, shocks and tension can
damage. The inner structure of materials can be changed to its detriment without this being visible.
12
Torque in Nm
30–40
30
15
14–20
5–10
3–5
25–30
10
Advertenties
Hoofdstukken
Inhoudsopgave
