5.2.1 Cycling with electrical pedal assistance
We recommend that you first try out the Carqon flatbed in a quiet environment and without cargo. This way
you can get used to your Carqon.
Only switch on the pedal assistance when you feel safe and secure with the flatbed.
●
Pay attention when steering, we recommend reducing speed before steering.
●
The pedal support is interrupted when you stop pedalling. As soon as you start pedalling again,
●
the support switches on again automatically. Cycling with your Carqon is, if the pedal assistance is
switched on, different from a non-electric (cargo) bike.
The pedal assistance is legally limited at a speed of 25 km/h.
●
When the pedal assistance is turned off, the Carqon cycles heavier than a non-electric flatbed. This is
●
due to the weight of the electric components.
Never walk with the pedal assistance switched on, as the Carqon flatbed can suddenly accelerate if you
●
accidentally bump into the pedals.
If you still want to switch on the pedal assistance while walking, use the walk-assist function.
●
Stop pedalling while braking and try to brake simultaneously and evenly with both brake levers.
●
Switch off the support in case of a poor or slippery road surface .
●
5.3 Bosch Purion display
For a detailed explanation of the Bosch motor, display and battery, please refer to the enclosed Bosch manual,
or to bosch-e-bike.com.
1.
On/off button for on-board computer
2.
Push assistance button WALK
3.
Fastening screw for on-boardcomputer
4.
Holder for on-boardcomputer
5.
Decrease assistance level button–
6.
Increase assistance level button+
7.
Display
8.
Protective cap for USB port
9.
USB diagnostic port(for servicing purposes only)
Display elements of on-board computer
a.
Speedometer
b.
Km/h unit indicator
c.
Mph unit indicator
d.
Total distance indicator TOTAL
e.
Range indicator RANGE
f.
Service indicator
g.
Battery charge indicator
h.
Illumination indicator
i.
Assistance level indicator/value indicator
j.
Trip distance indicator TRIP
24