Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating Voltage / Direction Control
The operating voltage of the system is to check for conformity according to type plate data.
The protective cap located on the cable must be removed just before the electrical connection.
After electrical connection, the correct direction of the stirring propeller mixer must be inspected.
If the rotational direction of the stirring propeller is incorrect, two of the three conductor phases (L1, L2, L3) that are direct-
ly supplied from the mains must the interchanged.
Assembling the motor bracket to the mixer
Fasten the mixer to the motor bracket (Item 12) as illustrated, using two cylinder head screws (Item 1), one cylinder head
screw (Item 2) and the associated U-washers (Items 3 & 4). Additionally use a medium- strength thread locker to avoid an
unintended release of the screws during operation. Lay the connecting cable between the pipe clamps (Item 6) and screw
it to the motor bracket using two cylinder head screws and U-washers (Items 5 & 4). Great care should also be taken to
ensure that the cable is always laid or assembled on a large radius, so that any sharp bend in the cable is prevented.
³ »
·
º
¾
¶
µ
¿
²
´
¿
ENGLISH | 29
¹
Advertenties
Hoofdstukken
Inhoudsopgave
