Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
The appliance does not heat up, the colon
flashes on the clock display,‚‡‹©
appears in the temperature display,
for example.
Electronically-controlled functions are
faulty.
When an operating mode is switched on,
•or œ appears in the temperature display.
The appliance has switched off automati-
cally, ‹‹‹ flashes in the temperature dis-
play.
Smoke is generated during roasting or
grilling.
High levels of condensation are generated
in the cooking compartment.
Enamelled accessories have light, matt
marks.
Door panels are steamed up.
Error messages with "
If an error message with " is shown in the display, press the
0 button. This cancels the error message. You may then have
Error message
"‹‚‚
"‚‚†
Replacing the bulb in the oven ceiling light
If the bulb in the oven light fails, it must be replaced. Heat-
resistant, 40 watt spare bulbs can be obtained from our after-
sales service or a specialist retailer. Only use these bulbs.
:
Risk of electric shock!
Switch off the circuit breaker in the fuse box.
Place a tea towel in the oven when it is cold to prevent
1.
damage.
Remove the glass cover. To do this, press back the metal
2.
tabs with your thumb (Fig. A).
Unscrew the bulb and replace it with one of the same type
3.
(Fig. B).
Refit the glass cover. When doing this, insert it on one side
4.
and press firmly on the other side. The glass cover will click
into place.
Remove the tea towel and switch on the circuit breaker.
5.
Possible cause
A button combination was actu-
ated.
Energy surges (e.g. lightning
strike).
The appliance has not cooled
down fully.
The appliance has switched off to
protect itself from overheating.
Fat is burning on the grill element. Continue grilling or roasting until the fat on the grill
Wire rack or universal pan
inserted incorrectly.
Normal occurrence (e.g. when
baking cakes with very moist top-
ping or cooking a large roast).
Normal occurrence caused by
dripping meat or fruit juices.
Normal occurrence caused by
temperature differences.
to reset the time of day. If the error is shown again, call the
after-sales service.
You can take remedial action yourself if the following error
messages are displayed.
Possible cause
A button was pressed for too long
or has jammed.
The temperature in the cooking
compartment is too high.
Glass cover
You must replace a damaged glass cover. Suitable glass
covers may be obtained from the after-sales service. Please
specify the E number and FD number of your appliance.
Note/remedy
Switch off the appliance, press and hold the info
button for 3 seconds, then press and hold the
clock function button for 4 seconds before press-
ing and holding the info button again for a further
3 seconds.
Reset the function concerned.
Wait until the appliance has cooled down, then
switch on the operating mode again.
Turn the operating mode selector back to the
Û position.
element is burnt away.
Place the wire rack in the universal pan and insert
them together at a lower shelf height.
Open the appliance door briefly from time to time
during operation.
Not possible
Heat the appliance up to 100 °C and then switch
off again after 5 minutes.
Note/remedy
Press all buttons individually. Check that the but-
tons are clean. If the error message remains,
please contact the after-sales service.
The oven door locks. Wait until the cooking com-
partment has cooled down. Clear the error mes-
sage with the 0 button.
51
Advertenties
Hoofdstukken
Inhoudsopgave
