Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating mode
Top/bottom heat
%
Circotherm intensive 220
0
Bread-baking
ë
Bottom heat
$
All-round grilling
4
Full-surface grill
+
Centre-area grill
(
Steam cooking
é
Pyrolytic
x
Interior lighting
\
Current temperature
Press the ± info button. The current temperature appears for
3 seconds.
Note: The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
Temperature reached (figure A)
■
Appliance reheating (figure B)
■
Switching off the appliance
Turn the operating mode selector to the Û position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is switched
off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Temperature dis-
Meaning
play
Residual heat high (above 120 °C)
•
Residual heat low (between
œ
60 °C and 120 °C)
34
Default temper-
Temperature
ature in °C
range in °C
170
50 - 275
50 - 275
200
180 - 220
200
50 - 225
170
50 - 250
220
50 - 275
180
50 - 275
Fixed setting
-
Level 0
1, 2 and 3
Fixed setting
-
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
Press and hold the ± info button for 3 seconds to go to
1.
the basic settings menu.
In the temperature display, ™‚‹ appears.
Press the ± info button briefly and repeatedly until the setting
2.
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g. ™„ƒ).
Using the temperature selector, set the required basic setting
3.
within a submenu (e.g. ™„„).
Press and hold the ± info button for 3 seconds.
4.
Your basic setting is saved.
You can change the following basic settings:
Basic settings menu
Submenu
Basic setting
Childproof lock
Appliance controls
unlocked
Appliance controls locked
Appliance controls perma-
nent lock
Audible signal
Audible signal off
Audible signal 30 seconds
Audible signal 2 minutes
Audible signal 10 minutes
Automatic safety cut-out
The automatic safety cut-out is activated if your appliance is
switched on and you have not made any settings for a long
time.
The length of time after which your appliance switches itself off
depends on the settings that you make.
‹‹‹ flashes in the temperature display. Appliance operation is
interrupted.
Turn the operating mode selector to the Û position to deactivate
it.
Setting
symbol
™‚‹
™‚‚
™ƒ‚
™„‹
™„‚
™„ƒ
™„„
Advertenties
Hoofdstukken
Inhoudsopgave
