Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Pump housing type
Single pump
Twin-head pump (left):
Twin-head pump (right):
Fig. 56: Pump housing type menu
11.4
Display for twin-head pump oper-
ation
Installation and operating instructions • Wilo-Yonos GIGA2.0-I/-D • Ed.02/2023-08
Universal
Display text
1.0
Settings
1.4
Dual pump management
1.4.5
Pump housing type
1.4.5 / 1
Single pump
1.4.5 / 2
Twin-head pump (left):
1.4.5 / 3
Twin-head pump (right):
NOTICE
The configuration of the hydraulics must be carried out before establishing
the twin-head pump connection. With twin-head pumps delivered from
the factory, the hydraulic position is pre-configured.
Each twin-head pump partner has its own graphic display, showing the values and settings.
The home screen can be seen on the display of the main pump with a mounted differential
pressure sensor, as with a single pump.
The feature SL is shown on the display of the partner pump without a mounted differential
pressure sensor in the setpoint display field.
NOTICE
If a twin-head pump connection is established, entries on the graphic
display of the pump partner are not possible. This can be identified by a
lock symbol on the "Main menu symbol".
Q is = 17.4 m³/h
Fig. 57: Twin-head pump partner home screen
Symbol of main and partner pump
The home screen shows which pump is the main pump and which is the partner pump.
•
Main pump with a mounted differential pressure sensor: "Home screen" as with single
pump
•
Partner pump without a mounted differential pressure sensor: symbol SL in setpoint dis-
play field
Two pump symbols are displayed in twin-head pump operation in the "Active influences"
area. This is what they mean:
Case 1 – main/standby operation: only the main pump is running.
Indication on the display of the main pump
Indication on the display of the partner
pump
en
171
Advertenties
Hoofdstukken
Inhoudsopgave
