Inhoudsopgave
Advertenties
40. Transport and storage
Manual_FX-KS226_Int24_rev3
Chain stay
•
Turn the chain stay over from time to time to
prevent one-sided wear.
•
The guide groove of the chain stay must always
be at right angles, so check the groove for wear from time
to time.
Place a ruler against the chain stay and the outside of a
saw tooth. If there is a gap between the ruler and the
chain stay, the guide groove is in order. If there is no
clearance, the guide is worn out. In this case the chain
stay must be turned over or replaced.
(1) Ruler (2) Distance (3) No distance (4) Chain runs
crooked
-
During transport and when changing location
during work, the chainsaw must be switched off and the
chain brake must be released to prevent the chain from
starting up accidentally.
-
Never carry and transport the chainsaw with the
saw chain running!
-
When transport/storage over a longer distance,
the supplied rail guard must be fitted in any case.
-
Only carry the chainsaw by its handle. The saw-
bar points to the rear after the saw. Do not come into
contact with the muffler (risk of burns).
-
Store the chainsaw safe in a dry area. The saw
must not be stored outdoors. Do not make the chainsaw
accessible to children.
-
When storing and shipping the chainsaw for a
longer period of time, the fuel and oil tank must be
completely empty.
In vehicles: Secure the device against tipping over,
damage and fuel leakage.
67
Advertenties
Inhoudsopgave
Probleemoplossen
