Inhoudsopgave
Advertenties
Manual_FX-KS226_Int24_rev3
ATTENTION
Safety
Before starting work, first read the section "
instructions
". For practice purposes, it is recommended
that you first saw through pieces of wood that are easy to
cut.
This also helps you to become familiar with the operation
of the chainsaw.
Always observe these safety regulations. The chainsaw may
only be used for cutting wood. It is prohibited to cut other
materials. The vibration and kickback are different for
different materials and the safety characteristics are not be
guaranteed.
Do not use the chainsaw as a lever to lift, move or split
objects.
Do not stand over fixed uprights when sawing. It is
prohibited to connect to the chainsaw's top shaft to any
other parts than those specified by the manufacturer.
It is not necessary to push the chainsaw into the interface.
Run the engine at full throttle and apply only light pressure
to the saw when starting.
If the saw-chain is jammed in the interface, do not try to
pull the chain bar out by force, but use a wedge or a bar to
pry up the interface.
55
Advertenties
Inhoudsopgave
Probleemoplossen
