Inhoudsopgave
Advertenties
33. Fuel and saw-chain oil
DANGER!
Danger of injury!
Fuel is explosive!
•
Switch off the engine and let it cool down before refuelling.
•
It is essential that you observe all safety instructions for handling
•
Fuel
ATTENTION!
Device damage!
Only use the prescribed fuel/oil mixture, mixing ratio 40:1, use only 2-stroke oil for mixing.
ATTENTION!
Device damage!
Always check after filling the fuel:
• Place the device in a safe place, with the fuel/oil mixture filler cap (4) facing upwards.
•
Clean the fuel filler cap (4) and filler neck if necessary
•
Slowly unscrew and remove the fuel filler cap (4)
•
Carefully fill in the fuel-oil mixture. Do not spill!
•
Check the seal in the fuel filler cap (4) for damage and clean if necessary
•
Replace damaged seal immediately!
•
Tighten the tank cap (4) with seal by hand
•
Always wipe up any spilled fuel.
Filling in saw-chain oil
•
Place the device safely, with the oil cover for saw-chain oil (5) facing upwards
•
Clean oil cap (5) and filler neck if necessary
•
Slowly unscrew and remove the oil cover (5)
•
Fill in saw-chain oil carefully. Do not spill!
•
Check the seal in the oil cover (5) for damage and clean if necessary
•
Replace damaged seal immediately!
•
Tighten oil cover (5) with seal by hand
•
Always wipe up any spilt saw-chain oil
34. Starting the chainsaw
•
Take a secure standing position
•
Place the appliance on the floor so that the saw-chain cannot come into contact
with anything
•
Activate the chain brake (hand guard audibly engages to the front)
•
Grip the handle firmly with one hand and press the device onto the floor
35. Cold start
•
Set ignition switch (3) to [1]
•
Press the fuel pump (15) gently until no more bubbles are visible (approx. 10×).
•
Pull out the choke lever (14) completely
•
Pull out the pull starter (6) evenly to the stop until the first ignition noise is heard
Manual_FX-KS226_Int24_rev3
51
Advertenties
Inhoudsopgave
Probleemoplossen
