Inhoudsopgave
Advertenties
Manual_FX-KS226_Int24_rev3
Saws
•
Always saw in a relief cut (1) on the pressure side
first
•
Then saw in the separating cut (2) on the pulling
side - otherwise the chainsaw may jam or kickback
ATTENTION
3.
Always ensure a safe working position. Never stand
on the branch to be cut.
4.
Bring the chainsaw into the cut at full throttle and
(if possible) firmly set the claw stop - only then saw,
preferably work with claw stop - to have better control of
the device. When working without a claw stop, the device
can pull the operator forward. Pull the chainsaw out of the
wood only with the chain running.
ATTENTION
Watch out for rebounding branches and twigs.
Trim standing trees first from bottom to top, then saw
through the branch from the top.
1. ensure firm stance and do not use a ladder. Preferably
work from an aerial work platform if the operating
conditions allow
2. do not exceed the range.
3. do not saw above shoulder height.
5.
4. always hold the chain saw with both hands
(except for one-handed use of the chain saw, see section
10.1.5)
57
Advertenties
Inhoudsopgave
Probleemoplossen
