Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Package, Transport, Storage
4.1. Delivery
On arrival, the delivered items must be inspected for dam-
age and a check made that all parts are present. If any
parts are damaged or missing, the transport company or
the manufacturer must be informed on the day of delivery.
Any claim made at a later date will be deemed invalid.
Damage to parts must be noted on the delivery or freight
documentation.
4.2. Transport
The pump station may be transported and stored in
vertical position. Make sure that it cannot roll or fall
over.
Take care that the pump station does not touch sharp
edges. Protect the pump station against massive shocks
and impacts.Only the appropriate and approved fastening
devices, transportation means and lifting equipment may
be used. These must have sufficient load bearing capacity
to ensure that the product can be transported safety. If
chains are used they must be secured against slipping.
The personnel must be qualified for the tasks and must
follow all applicable national safety regulations during the
work.
The product is delivered by the manufacturer/shipping
agency in suitable packaging. This normally precludes the
possibility of damage occurring during transport and stor-
age. The packaging should be stored in a safe place if the
location used is changed frequently.
4.3. Storage
Newly supplied products are prepared that they can be
stored for 1 year. The product should be cleaned thorough-
ly before interim storage.
The following should be taken into consideration for stor-
age:
•
Place the product on a firm surface and secure it
against falling over.
Danger from falling over!
Never put down the product unsecured. If the prod-
uct falls over, injury can occur!
•
It is also important to ensure that the equipment is
stored in dry rooms, in which no major temperature
changes are present.
•
Any suction or pressure connections on products
should be closed tightly before storage to prevent
impurities.
•
For longer periods of storage, the pump should be
protected against moisture, solar radiation, frost or
heat.
If these rules are observed, your product can be stored
for a longer period. Please remember that elastomer parts
and coatings become brittle naturally.
20 | ENGLISH
4.4. Returning to the supplier
Products which are delivered to the plant must be clean
and correctly packaged. In this context, clean means
that impurities have been removed and decontaminat-
ed if it has been used with materials which are hazard-
ous to health. The packaging must protect the product
against damage. Please contact the manufacturer before
returning!
Advertenties
Hoofdstukken
Inhoudsopgave
