Download Inhoudsopgave Inhoud Print deze pagina

Faults And Repairs; Malfunction Table - CONSTRUCTA CF2347 1 Series Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Put the cover back in place and screw it on.
7.
Attach the oven door.
8.
Do not use the oven again until the panels have been
correctly installed.

Faults and repairs

It is not always necessary to call the after-sales service.
Sometimes, you can find a remedy yourself. You will find some
tips for troubleshooting in the following table.

Malfunction table

Problem
Electrical operation is faulty (e.g. indicator
lamps no longer light up).
Liquid or thin batter runs to one side.
Appliance no longer works, ‹:‹‹ flashes
in the clock display.
‹:‹‹ flashes on the clock display,
"rrr"appears on the temperature display.
The temperature display shows, EXXX,
e.g. "„‹‹.
Appliance operation is not possible, D
and -†-appear in the temperature display.
Appliance operation is not possible, D
and -†˜ appear in the temperature dis-
play.
The appliance does not heat up, the colon
flashes on the clock display,‚‡‹©
appears in the temperature display,
for example.
Electronically-controlled functions are
faulty.
When an operating mode is switched on,
•or œ appears in the temperature display.
The appliance has switched off automati-
cally, ‹‹‹ flashes in the temperature dis-
play.
Smoke is generated during roasting or
grilling.
High levels of condensation are generated
in the cooking compartment.
Enamelled accessories have light, matt
marks.
Door panels are steamed up.
:
Possible cause
Circuit breaker faulty.
Appliance not installed level.
There was a power cut.
The power supply was inter-
rupted while the appliance was in
operation.
Internal fault in the appliance elec-
tronics.
The appliance controls have been
locked.
The appliance controls were
locked permanently.
A button combination was actu-
ated.
Energy surges (e.g. lightning
strike).
The appliance has not cooled
down fully.
The appliance has switched off to
protect itself from overheating.
Fat is burning on the grill element. Continue grilling or roasting until the fat on the grill
Wire rack or universal pan
inserted incorrectly.
Normal occurrence (e.g. when
baking cakes with very moist top-
ping or cooking a large roast).
Normal occurrence caused by
dripping meat or fruit juices.
Normal occurrence caused by
temperature differences.
Risk of electric shock!
Work on the appliance electronics may only be performed by
a specialist.
Always disconnect the appliance from the power supply
when work is carried out on the electronics. Switch off the
circuit breaker or remove the fuse from your household fuse
box.
Note/remedy
Check fuses in the fuse box and replace if neces-
sary.
Check appliance installation (see the Installation
instructions).
Reset the time of day (see section: Electronic
clock).
Press the clock function button, reset the time of
day (see section: Electronic clock).
Press the clock function button. If the message
does not go out, pull out the mains plug and plug it
back in again after approx. 10 seconds.
Deactivate lock (see section: Childproof lock).
Deactivate permanent lock (see section: Childproof
lock).
Switch off the appliance, press and hold the info
button for 3 seconds, then press and hold the
clock function button for 4 seconds before press-
ing and holding the info button again for a further
3 seconds.
Reset the function concerned.
Wait until the appliance has cooled down, then
switch on the operating mode again.
Turn the operating mode selector back to the
Û position.
element is burnt away.
Place the wire rack in the universal pan and insert
them together at a lower shelf height.
Open the appliance door briefly from time to time
during operation.
Not possible
Heat the appliance up to 100 °C and then switch
off again after 5 minutes.
97

Advertenties

Inhoudsopgave
loading

Inhoudsopgave