Download Inhoudsopgave Inhoud Print deze pagina

Setting The Cleaning Level; After Cleaning; Care And Cleaning; Cleaning Agents - CONSTRUCTA CF2347 1 Series Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Setting the cleaning level

Set the operating mode selector to x. 0 appears in the
1.
temperature display.
Use the temperature selector to set the cleaning level.
2.
Pyrolytic cleaning starts after a few seconds.
The clock display shows the cleaning duration. The oven will
start up after a few seconds. The time starts counting down.
After the programme starts, the oven door locks.
Once cleaning has finished
0:00 appears in the clock display and y flashes. Set the
operating mode selector to o and press the KJ button once.
You can only open the oven door once the oven has cooled
down.
Cancelling cleaning
Turn the operating mode selector back to Û. You can only open
the oven door once the oven has cooled down.

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.

Cleaning agents

To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use
aggressive or abrasive cleaning agents,
cleaning agents with a high concentration of alcohol,
hard scouring pads or sponges,
high-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Area
Cleaning agents
Oven front
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove flecks of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning prod-
ucts suitable for hot surfaces are availa-
ble from our after-sales service or from
specialist retailers. Apply a very thin layer
of the cleaning product with a soft cloth.
94
Changing the cleaning level
Once the programme has started, you can no longer change
the cleaning level.
Setting cleaning to run overnight
So that you can use your oven throughout the day, delay the
end of the cleaning process to during the night. Make settings
as described in steps 1 and 2.
Press the KJ clock function button until they symbol
1.
appears.
Set the End of operation to a later end time using the rotary
2.
selector.
The oven switches to standby. The display shows the time of
day. When the oven starts, you can see the time counting
down.

After cleaning

Once the cooking compartment has cooled down, wipe out the
ash that has been left behind in the cooking compartment with
a damp cloth.
Area
Cleaning agents
Door panels
Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Door cover
Stainless steel cleaning agents (available
from our after-sales service or from spe-
cialist retailers):
Please observe the manufacturer's
instructions.
Cooking compart-
Hot soapy water or a vinegar solution:
ment
Clean with a dish cloth.
If there are heavy deposits of dirt, use a
stainless steel scouring pad or oven
cleaner. Only use when the cooking
compartment is cold.
It is best to use the self-cleaning function.
Observe the instructions in the Pyrolytic
cleaning section.
Glass cover for the
Hot soapy water:
oven light
Clean with a dish cloth.
Shelves
Hot soapy water:
Soak and clean with a dish cloth or
brush.
Telescopic shelves
Hot soapy water:
Clean with a dish cloth or a brush.
Do not soak. Clean in the dishwasher, or
in the oven as part of the self-cleaning
programme. The rails may be damaged
causing them to jam.
Accessories
Hot soapy water:
Soak and clean with a dish cloth or
brush.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave