The @ symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the R button for approx. four seconds.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Basic setting
Clock display
™‚
‚ = on
Signal duration
™ƒ
ƒ= medium = 2 minutes
Signal volume
™„
ƒ = medium
Waiting time
™...
ƒ= medium = 5 seconds
Requirement: Your appliance is switched off.
Press and hold the 0 button for several seconds.
1.
The first basic setting appears in the display.
Use the @ or A button to change the basic setting.
2.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
:
Risk of serious damage to health!
Microwave energy may escape if the cooking compartment
door or the door seal is damaged. Never use the appliance if
the cooking compartment door or the door seal is damaged.
Contact the after-sales service.
Notes
Slight differences in colour on the front of the appliance are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
34
All manuals and user guides at all-guides.com
Options
Clock display
ƒ = off
‚ = short = 10 seconds
„ = long = 5 minutes
‚ = low
„ = high
‚ = short = 2 seconds
„ = long = 10 seconds
The @ symbol on the display goes out. The childproof lock is
deactivated.
Childproof lock with automatic programmes
When automatic programmes have been set, the childproof
lock is not operational.
Explanation
Displays the clock
Audible signal after the cooking time has
elapsed
Volume of the signal
Waiting time between two separate steps,
after setting
Confirm by pressing the 0 button.
3.
The next basic setting appears in the display. You can go
through all of the basic settings using the 0 button and
make changes using the @ or A button.
When finished, press and hold the 0 button for several
4.
seconds.
All settings are applied.
You can change the settings at any time.
Unpleasant odours, e.g. after fish has been prepared, can be
■
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use
sharp or abrasive cleaning agents,
■
metal or glass scrapers to clean the glass in the appliance
■
door.
metal or glass scrapers to clean the door seal,
■
hard scouring pads and sponges,
■
cleaning agents with high concentrations of alcohol.
■
Wash new sponge cloths thoroughly before use.
Allow all surfaces to dry thoroughly before using the appliance
again.