Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6- Press
successively to exit the Programming mode and return to the Auto mode.
Note: If no button is pressed, the system will automatically return to Auto mode after a few minutes.
• Choice and allocation of programmes
1- If you have just set the time and day, the cursor will
automatically move to PROG.
If you are in Auto, Comfort, Eco or Frost protection mode,
press
for 5 seconds. Once the cursor is positioned
under the time setting symbol
The days of the week scroll with the programme assigned
to them by default, i.e. in Comfort "CONF" every day.
2- Press
or
.
The programme assigned for day 1 (1=Monday ...
7=Sunday) will flash.
3- Select the programme you want for that day with
or
.
Confirm by pressing
4- The programme assigned for the 2nd day (i.e. Tues-
day) flashes.
Repeat the operation described above (paragraph 3) for
each day of the week.
5- Once the days have been programmed, confirm by pressing
programmes you have assigned to them (P1, P2, P3, CONF or ECO).
To exit the Programming mode and return to Auto mode, press
, press
again briefly.
.
12
Prior information:
Display area
2
1
1
1
1
. The days of the week scroll through the
twice.
correspondence of days/numbers
1
maandag
2
dinsdag
3
woensdag
4
donderdag
5
vrijdag
6
zaterdag
7
zondag
20
Advertenties
Hoofdstukken
Inhoudsopgave
