Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Calibration of the sensor
2- If the temperature difference is positive, for example:Set temperature
(what you want) = 19°C. Room temperature (what you read on a reliable
thermometer) = 21°C. Measured difference = +2°C. To correct the deviati-
on, proceed as follows: Sensor temperature reading = 21°C.
(The measured temperature is often different and higher than the set
temperature).
Increase the temperature measured by the sensor by 2°C using the
key. In our example, the temperature measured by the sensor is increased
from 21°C to 23°C.
Press
to confirm and move to the next setting. To exit the expert
settings, press 3 times
Resetting the sensor calibration
To set the correction value to "0", proceed as follows:
1- When the temperature reading of the sensor is displayed, press
or
for at least 3 seconds.
2- Press
to confirm and move to the next setting.
To exit the expert settings, press 3 times
Important: The following settings must be carried out by a
professional or qualified
professional, they can be carried out in production or on site during
the first installation.
CHOICE OF ENERGY TYPE
Depending on the type of fan, it is equipped with an output for controlling
a central heating pump to supply a secondary hydraulic heat circuit. The
presence of this function in the programme settings does not indicate that
the fan has this function. Therefore, fan types BXFBPRFVIPA do not have
this function and the setting should remain "electric".
1- ELEC is shown in the display.
do not change the type of energy used by the towel dryer - it must
remain ELEC
2- Press
to confirm and move to the next setting.
To exit the expert settings, press 3 times
CHOICE OF POWER
In order to have a regulation adapted to the appliance and to estimate the
energy consumed, it is essential to set its power parameters.
1- By default, 500W is selected. You can choose a power level between
500W and 1500W. Press
2- Then press
to confirm and move to the next setting.
To exit the expert settings, press 3 times
.
.
or
to select the desired power.
.
3 sec.
7
Advertenties
Hoofdstukken
Inhoudsopgave
