Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LIMITATION OF THE INTERNAL HEATING TEMPERATURE
The blower has an integrated overheating protection. This is triggered
when an internal temperature limit is reached and causes the blower and
the control system to stop immediately. This maximum limit is preset at
65°C. You can vary it from 60°C to 90°C in 5°C steps.
To do this, press
or
If you do not wish to change it, press
The appliance automatically proposes the next setting.
To exit the expert settings, press 3 times
RETURN TO FACTORY SETTINGS
If the PIN code protection is deactivated, you can reset the user, installer
and expert settings to their original values.
1- From the temperature limit, press
rESt is displayed for 1 second.
NO
2-
is displayed. Press
YES
YES
= Reset to factory settings
NO
= Factory settings not reset
3- Press
for 5 seconds. The unit returns to its original configuration
and automatically returns to Auto mode.
The following factory settings will then take effect:
Settings
Operation
User
Installer
Expert
and confirm by pressing
.
.
or
to select.
Parameters
Comfort temperature setpoint
Boost duration
Keyboard lock
Backlighting
Lowering level Eco
Setpoint temperature frost protection
Super Comfort
Low temperature limit Comfort
High temperature limit Comfort
Maximum Boost time allowed
Maximum ambient temperature for automatic
switch-off of the Boost
Temperature unit
Auto Detect
window opening
Double optimisation function
PIN code protection
PIN code value
Type of energie
Power
Limitation of the internal heating temperature
.
Factory values
19°C
60 min.
Off
L3
- 3,5°C
7°C
Activé
7°C
30°C
60 min.
35°C
°C
On
On
Opti comfort
Off
0000
Elec
500W
90°C
1
2
5 sec.
8
Advertenties
Hoofdstukken
Inhoudsopgave
