Download Inhoudsopgave Inhoud Print deze pagina

Maintenance And Cleaning Of The Dust Filter - Vipera Vento Gebruikershandleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Maintenance and cleaning of the dust filter

Before carrying out any maintenance work, switch off the
appliance by the button (switch). The appliance can be
cleaned with a damp cloth; never use abrasive products or
solvents.
Maintenance and cleaning of the dust filter
The blower is equipped with a removable dust filter that traps impurities in
the air drawn into the room. When the filter is saturated, the accumulation of
dust can cause it to stop.
In Boost mode, the word FILT appears on the display
Before removing the filter, switch off the appliance by
the button (switch) located on the bottom of the blower.
blower.
To clean the filter, proceed in the following order:
1- Pull the tab of the filter from the right or left side and pull it out of its housing.
2- Use a hoover to remove dust from the filter. If the filter is very dirty, wash it under the water tap with a damp
sponge. After washing the filter, let it dry thoroughly.
Important: It is recommended to clean the filter at least once a month unless the FILT is displayed on the screen
prematurely. Before removing the filter, switch off the appliance by pressing the button (switch) on the bottom of the
blower.
3- Once cleaned and dried, replace the filter in its housing by inserting it into the guides.
11

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave