Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Before installation
The appliance is designed to be mounted at the back/bottom
of a horizontal tube towel dryer.
Due to this specific location, you may need to adjust
the position of the towel dryer
brackets to allow for the installation of the appliance.
Before marking out the position of the wall fixings, ensure that
the location of the ventilation unit does not conflict with these fixings.
If necessary, move the lower brackets upwards
to allow for proper installation.
If you are not integrating the radiator into a hydraulic
circuit the appendages must be installed and the radiator
filled with water.
Do not forget to place the
additional O-ring on the heating
element.
Installation
1- Position the 2 fixing brackets between the bars of the
towel rail
3- Adjust the height of the blower in relation to the bottom of the towel rail.
1
2- Position the blower behind the towel dryer and pass
the legs through the handles of the blower.
2
3
3
Advertenties
Hoofdstukken
Inhoudsopgave
