Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2- Press
and
seconds.
To exit the energy meter reset mode: press
the device automatically returns to the previously active
mode.
CHILD LOCK, KEYPAD LOCK/ UNLOCK
• Locking the keyboard
To lock the keyboard, you must
press and hold the
and
keys simultaneously for 5 seconds.
The padlock symbol
appears on the
display, the keyboard is locked.
• Unlocking the keyboard
To unlock the keyboard, you must hold down the
and
keys simultaneously, again for 5 seconds.
The padlock symbol
disappears from the display, the keyboard is
unlocked.
Important: When the keyboard
is locked, only the
(switch) button remains active.
If the appliance is put into Heating Standby
while the keypad is locked, it will be
necessary to unlock it the next time
the appliance is switched on to
to access the settings.
WEEKLY AND DAILY PROGRAMMING,
ENERGY SAVING
AUTOMATIC PROGRAMMING:
SELF-ADAPTIVE PROGRAMMING
This feature is available on products
equipped with a presence/absence detector.
• Presentation
Program Auto-programming (Auto) : After an initial learning phase of
one week, the device will analyse and decide on a weekly programme
adapted to your alternating periods of Comfort temperature and Eco
temperature, with the aim of achieving the best ratio of comfort
comfort and energy saving.
The learning process of your life rhythm continues week after week
week after week in order to adjust the programme if necessary.
• Operation
When you first put your device into
operation, the Auto-programming
is activated by default, in Auto mode.
To deactivate it and change the
programme, see choosing and assigning
programmes page 9.
The first week of operation is a learning
week during which the appliance
memorises your habits and develops a
programme for the week.
It therefore defines a programme
of Comfort and Eco periods,
independently for each day of the week.
During this learning week, the appliance
temporarily operates in permanent
Comfort mode.
Important: To ensure correct operation of the
self-programming, make sure that the presence/
absence detector is not disturbed or blocked by an
external source
simultaneously for more than 5
3
Display example
in Comfort period
Example of a display
in Eco period
see important information on presence/absence detection
on page 20.
or
,
• Application of the intelligent programme
One week after switching on, the appliance will apply the new
programme for the next 7 days. Then week after week the appliance will
continue to optimise the the intelligent "Auto" programme, adjusting the
Comfort and Eco periods as close as possible to your life rhythm.
When the product is in Frost Protection mode or in heating standby
mode for more than 24 hours, the learning and optimisation of the
programme is interrupted: the appliance remembers the programme
memorised the last week before switching to Frost Protection mode or
heating standby.
- Example 1: If the product is installed in mid-season or if it is installed
on the building site, it can be started up on standby of the heater. When
you select Auto mode, the learning week will start automatically.
The appliance will be in permanent comfort and will memorise your
habits to apply the appropriate programme the following week.
- Example 2: You select the frost protection mode before leaving on
holiday. When you return, the appliance will automatically apply the
intelligent program stored before your departure.
In the case of pilot wire control from an energy manager
the pilot wire will have priority over the AUTO program resulting from the
Self-Training.
WEEKLY AND DAILY PROGRAMMING
In this mode, you can program your appliance by assig-
ning 1 of the 5 programs offered to each day of the week.
• Access to programming
From Auto, Comfort, Eco or Frost Protection mode, press and hold
for 5 seconds to enter the programming mode.
Diagram of the sequence of settings:
Setting the time
• Setting the time and day
In this mode, you can set the time and day to program
your device to your liking.
1- From Auto, Comfort, Eco or Frost protection mode,
press
The cursor will move to the Set Time and Day mode.
3
2- Set with
To scroll quickly through the hours, press and hold
or
3
Confirm by pressing
Setting the day
for 5 seconds.
1
5 sec.
or
. The two hour digits flash.
.
.
1
12
Choice of
programmes
18
Advertenties
Hoofdstukken
Inhoudsopgave
