Inhoudsopgave
Advertenties
EN
A single zone or all zones are not working:
− the safety device has been operated.
− this shall engage when a cooking zone has been
left on unintentionally.
− the safety shall also engage when one or more touch
control keys are covered.
− a pan is empty and the base has overheated.
− the hob also has an automatic power reducer and
automatic shut-down in the event of overheating.
The fan continues to operate after the hob has
switched off:
− this is not a defect, the fan is protecting the electronic
equipment.
− the fan will stop automatically.
7.1.2 Overview of warnings
H
The cooking surface
of the cooking zone
is still too hot to
touch.
− There is no
− The cooking pot
− The diameter of
W1 The induction
module is
overheated.
The temperature of
W3
the worktop is too
high.
cooking pot/pan
on the cooking
zone.
is not suitable for
induction.
the bottom of the
cooking pot is
too small for the
cooking zone.
Allow the cooking
surface to cool further
until symbol disappears.
Place a pot/pan on the
cooking zone or choose
induction-capable
cookware for optimal
performance.
Check cooling.
The zone can be used
again after cooling
down sufficiently.
Remove the pot from
the zone to speed up
cooling. (see p.99 for
more info)
– 124 –
Advertenties
Hoofdstukken
Inhoudsopgave
