Inhoudsopgave
Advertenties
Translation of the original instructions
MADE IN FRANCE
WEIGHT OF POWERDUCTION LANCES
The weight of the spears was measured with the arm extended. (These measurements are for guidance only and can-
not be 100% accurate as they depend on the position of the spear on the scale).
S90 inductor
(without liquid)
Inductor S90 (with
liquid circulation)
S180B3 inductor
(without liquid)
Inductor S180B3W
(with liquid
circulation)
C20B1 inductor
(without liquid)
Inductor C20B1
(with liquid
circulation)
L90 inductor
(without liquid)
Inductor L90
(with liquid
circulation)
L20B4 inductor
(without liquid)
Inductor L20B4
(with liquid
circulation)
«PURGE» MODE
This mode is only available if the heat is not activated (green switch is off).
1. Push the button (10), the pump stops and the LED (9) lights up.
2. Position the torch on its support and place the cable on the floor (to avoid liquid spillage).
3. Unscrew the accessory by hand.
4. Push and hold the heat authorisation button (2) for 3 seconds until it lights up.
5. Place the torch button above a bucket with a capacity of 10 l minimum.
6. Push the torch button (11). The pump activates until the debit falls under 2 l/minute or for 2 minutes. The machine
displays the debit in decilitre per minute. To interrupt the pump during the cycle, push any button.
7. To empty the cooling circuit, use a blower to blow air (30PSI) at the end of the torch until you can hear the air
flowing or projections of liquid coming out of the tank.
8. To remove the remaining liquid from the bottom of the tank
110 LG: use a vacuum pump or tilt the product to the front.
160LG/220LG: unscrew the cap under the Powerduction with a wrench (6 pan of 8).
Once the tank is completely empty, screw the cap back on.
30
POWERDUCTION 110LG / 160LG / 220LG
37LG
39/50LG
1.4 kg
1.5 kg
1.6 kg
1.7 kg
1.4 kg
1.6 kg
1.4 kg
1.6 kg
110LG
160/220LG
4.8 kg
3.4 kg
4.6 kg
4.5 kg
5.3 kg
3.6 kg
5 kg
5.1 kg
4.7 kg
2.9 kg
4.5 kg
4.3 kg
5.1 kg
3.2 kg
4.9 kg
4.7 kg
EN
The excluded beam
The excluded beam
The excluded beam
The excluded beam
The excluded beam
The excluded beam
Stem diagram (110) +
balancer diagram
The excluded beam
Stem diagram (110) +
balancer diagram
The excluded beam
Stem diagram (110) +
balancer diagram
The excluded beam
Stem diagram (110) +
balancer diagram
The excluded beam
Advertenties
Inhoudsopgave
