Inhoudsopgave
Advertenties
Translation of the original instructions
MADE IN FRANCE
1. Press the button (10), the pump stops and the LED (9) switches on.
2. Place the lance on its supports and put the cable on the ground (to prevent loss of cooling
liquid).
3. Unscrew the inductor by hand.
4. Depending on the choice of the new inductor: unscrew the adapter with the supplied
wrench and then screw the appropriate adapter back on (max. 7 N.m) or keep the adapter
already in place.
5. Screw the new inductor back on.
6. Press the button again (10).
The pump activates. For 5 seconds, the LEDs display a wait pattern.
If the flow is correct, the machine emits a double «BEEP» and the product is ready to operate.
Otherwise a fault is displayed (refer to the fault code table).
Inductors et Adaptators
The Powerduction 110LG/160LG/ 220Lg are delivered as standard with the 32L adapter and the L90 or L20B4
inductor. (depending on model).
The other accessories are optional, they allow to extend the heating possibilities to multiple applications.
Discover the
complete range
Adaptators
Inductors
L90
Ref. 059788
L70
Ref. 059771
L180
Ref. 059795
L180 SPIRAL
Ref. 065000
POWERDUCTION 110LG / 160LG / 220LG
32L
Ref. 064515
L20/B4
Ref. 067882
L20 ALU GLOVE
Ref. 069114
L180 D80
Ref. 069121
32S
Ref. 064508
S90
Ref. 058927
S180
Ref. 059269
S180/B1
Ref. 064881
EN
3
4
2
S70
Ref. 061569
S20/B1
Ref. 064874
S180/B3 W
Ref. 067899
29
Advertenties
Inhoudsopgave
