Setting The System Clock - HOUGHTON Webasto Cool Top Trail 20G Bedienings- En Installatiehandleiding

Airconditioner dakunit

Inhoudsopgave

Advertenties

6 | Operating Instructions

Fig. 37 Setting the operation mode

COOL mode

l In COOL mode the air distributor shows the

the vehicle will be cooled.

l Set temperature and fan speed can be selected manually.

l The compressor switches off when the set temperature is

reached, it automatically switches on again when the room

temperature setting is exceeded.

Fig. 38 COOL mode

DRY mode

l In DRY mode the unit is reducing the humidity inside the

vehicle.

l Set the temperature 1 °C lower than the current room tem-

perature.

l The air distributor shows the

Fig. 39 DRY mode

FAN mode

l In FAN mode indoor air is circulated through the vehicle

without heating or cooling.

l You can manually set the fan speed.

l The air distributor shows the

room temperature.

Fig. 40 FAN mode

HEAT mode

l In HEAT mode the air distributor shows the

vehicle will be heated.

l You can manually set the temperature and fan speed.

l The compressor switches off when the set temperature is

reached, it automatically switches on again when the room

temperature drops below the set point.

14 / 146

symbol and

symbol.

icon as well as the current

icon and the

Fig. 41 HEAT mode

NOTE

When operating in heating mode in low ambient tem-

peratures the unit periodically defrosts the outside heat

exchanger. The air distributor displays "dF" during de-

frosting and returns to heating when the defrost is

completed.

AUTO mode

l In AUTO mode the unit automatically selects heating or

cooling mode depending on the difference between cur-

rent room temperature and set point temperature.

l You can manually select the set temperature and fan

speed.

l The air distributor shows the

the

icon in cooling mode as well as the set temperature.

Fig. 42 AUTO mode

6.10