INSTELL ALARM FUNCTY
Houd de ALM toets 3 seconds imprinted
•
In the display HIGH AL RH shows the selected channel
•
The hoogste alarmgrens voor de luchtvochtigheid gaat snap
•
Met de ALM toets kunt u uit de the following alarm limits:
•
-
Bovengrens luchtvochtigheid ('HIGH AL RH "; standard
70%)
-
Ondergrens luchtvochtigheid ("LOW AL RH"; standard
20%)
-
Bovengrens temperatuur ("HIGH AL C"; standard 40 ° C)
-
Ondergrens temperatuur ("LOW AL C"; standard 0 ° C)
When de grenswaarde was shown in the display, it could have been changed
•
with behulp van de + en - toets
with behulp van de + en - toets
with behulp van de + en - toets
With an alarm limit activeren, moet de OK / MAX / MIN toets was imprinted wanneer de
•
werenste grenswaarde sent
India de alarmgrens riet is geactiveerd, sent the alarm on / off icoontje as inactief in
•
the bedieningsdeel van het display (doorgekruisd)
Toets en houd de + of - toets in the setting mode, you come in the snelle mode.
Toets en houd de + of - toets in the setting mode, you come in the snelle mode.
Toets en houd de + of - toets in the setting mode, you come in the snelle mode.
•
Om weer in the normal modes come, toets dan de ALM knop weer in of druk minimum
•
20 seconds geen grandchildren toets in.
Alarm function:
In the geval van een alarm, the ALARM icoontje (boven de gegevens) and the
•
corresponder end of the channel number. Bovendien zal het Hi of Lo icoontje knipperen
al het concerned kanaal getoond wordt.
As the alarm geluid is active, there are icoontje (belletje) knipperen en het geluid and
•
it takes 2 minutes to walk.
Toets ALM stop the alarm alarm.
•
The relevant "Hi" of "Lo" icoontje en ALARM blijven
•
snatchers totdat de corresponderende waarden weer within
66