Inhoudsopgave
Advertenties
-
High limit humidity ("HIGH AL RH", default 70%)
-
Low limit humidity ("LOW AL RH", default 20%)
Low limit humidity ("LOW AL RH", default 20%)
-
High limit temperature ("HIGH AL ° C", default 40 ° C)
-
Low limit temperature ("LOW AL ° C", default 0 ° C)
When displayed, the limit value can be changed by pressing
•
the "+" or "-" button.
In order to activate an alarm limit, the "OK / MAX.MIN." button
•
must be pressed while the corresponding limit value is displayed.
If the alarm limit is activated, the alarm on / off symbol is displayed as active
•
on the toolbar (not crossed out).
If the alarm limit is not activated, the alarm on / off symbol is displayed as inactive
•
on the toolbar (crossed out).
Press and hold + or - button in setting mode, you will enter fast mode.
•
To enter normal mode again, press either ALM button again or press for at least 20
•
seconds no button.
Alarm function:
In case of an alarm, symbol ALARM (above the date) and the corresponding channel
•
number flashes. Also the Hi or Lo symbol is flashing if the corresponding channel is
shown.
If the alarm sound is activated, the symbol (bell) flashes and the acoustic alarm will
•
sound for 2 minutes.
Press ALM button to stop the alarm sound.
•
The corresponding "Hi" or "Lo" symbol and ALARM continue
•
to flash until the corresponding value is again within the alarm limit or the alarm
limit is deactivated in alarm setting mode.
If any alarm limit is activated (no matter which alarm limit or which
channel), "ALARM" is displayed permanently in normal mode (in the time
The alarm sound can be deactivated in the basic settings of the
You can use the USB wireless transceiver and the PC software to easily make all alarm
settings on the PC and transfer those to the KlimaLogg
Grade:
and date display area).
KlimaLogg Pro if desired.
Per.
42
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
