Inhoudsopgave
Advertenties
After changing the battery on a transmitter, it is recommended to activate the
comprehensive transmitter search in Learn mode in order to
to re-establish contact as soon as possible.
An outdoor transmitter can only be added to a receiving device for 3 hours after it has been
commissioned. Then it only sends its currently measured values, but can no longer
be maintained in a receiving device.
LEARN MODE:
In learn mode, you have the option of manually initiating a station search. It is also possible to add a
transmitter individually to each channel or to remove an already entered transmitter from a channel.
Press the SET button to enter the setting mode.
•
CH1-8 and LRN appear on the display.
•
The channel numbers flash.
•
If transmitters have already been added to certain channels, a triangle is displayed above
•
the corresponding channel number.
Comprehensive station search
Press the OK / MAX / MIN button to start a comprehensive station search.
•
LEARNING and the channel numbers with a black bar appear on the display.
•
The station searches for transmitter signals for 3 minutes.
•
If a transmitter signal has been received, the bar disappears under the
•
corresponding channel number.
Channels that have already been added are retained and previously unknown
•
channels are assigned to free channels in turn.
Search for a specific channel
Press the + or - Key while CH 1-8 appears in the display.
Press the + or - Key while CH 1-8 appears in the display.
Press the + or - Key while CH 1-8 appears in the display.
•
You can now select any channel.
•
The selected channel number flashes.
•
Note:
14
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
