Inhoudsopgave
Advertenties
During radio clock reception, communication with the USB
Radio transceivers are not possible and will therefore be interrupted if necessary
and automatically again after successful reception
produced.
OPEN-COLLECTOR HARDWARE OUTPUT:
The logger has an open collector hardware output. This has two switching outputs, which react as
follows in the event of an alarm from channel 1. Switching point 1,
is active while exceeding temp. or rH on channel 1. switching point 2,
is active while falling below temp. or rH on channel 1.
A switching point is active as long as the alarm limit is exceeded or undershot and is deactivated again
as soon as the respective value is back in the standard or the respective alarm setting is deactivated.
The open collector output has a socket for a 3.5mm jack plug. The assignment is shown in the following
drawing.
21st
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
